Description
CatEyeSYNC™, control at ONE touch: switch on one light and every CatEyeSYNC™ light comes on. Wireless technology syncs them all so they behave as one. Check the battery level, change modes, set the braking mode and sync the flash patterns from your phone.
360 degree visibility at one touch: up to 7 lights work in sync as one.
(Other CatEyeSYNC™ lights that can join a SYNC Kinetic setup are the SYNC Core and the SYNC Wearable.)
A built-in accelerometer switches to burst mode as you slow down, which adds a further layer of safety. Use the SYNC Kinetic on its own or alongside other CatEyeSYNC™ lights for 360 degree visibility that nothing matches, by day or by night.
• A built-in accelerometer for the kinetic mode, which comes on by itself at 50 lumens when the bike slows
• Excellent daytime visibility in HyperFlash mode
• A group ride mode that does not tire the eyes of riders behind you
• Excellent side visibility
• OptiCubeTM lens technology
• Rechargeable lithium ion battery
• Charged over USB, with a Micro-USB cable included
• A low battery indicator
• 6 lighting modes *Charge time: 2.5 h.
• Mode memory function
• Automatic battery saving: at a low charge it switches to flashing mode by itself
*Pairing the lights requires the CatEyeSYNC™ app. Before buying, check that your phone is compatible with CatEyeSYNC™. The list of compatible devices:
https://www.cateye.com/data/resources/sync_compatible_device_en.pdf
• Sync every SYNC light
• Switch every light on or off at one touch
• Sync the modes and the flash timing to be seen better (SYNC Wearable, SYNC Kinetic)
• A synced kinetic mode for dynamic visibility, when used with the SYNC Kinetic
• Control it from the phone app
– Pair the lights, up to seven of them
– Turn mode syncing on or off
– Check the battery level
– Switch the lights on or off
– Turn syncing with other lights on or off
– Find Me makes a light flash at the press of a button in the app
Dimensions: 74.5 x 26 x 28mm
Weight: 43 g (with the battery)
Light source: 5 x red LED
Battery: lithium ion
Burn time:
High mode: 40 lumens, 1.5 h
Low mode: 5 lumens, 15 h
Flashing mode: 30 lumens, 50 h
Rapid mode: 50 lumens, 20 h
Group Ride mode: 40 lumens, 15 h
Daytime HyperFlash mode: 50 lumens: 30 h
*With the kinetic mode triggering 60 times an hour:
High mode: 40 lumens, 1.4 h
Low mode: 5 lumens, 6 h
Flashing mode: 30 lumens, 7 h
Rapid mode: 50 lumens, 6 h
Group Ride mode: 40 lumens, 6 h
Daytime HyperFlash mode: 50 lumens: 7 h
Charge time: 2.5 h (USB)
Mounting: a rubber strap, for seatposts of φ 26.0-32.0 mm
Water resistant IPX4
Note: the kinetic mode depends on how hard you slow down, so the light may not react, or may react with a delay.
